PIPE THREAD SEALANTS, CYL-SEAL® COMPRESSED GAS PIPE THREAD SEALANT
Abbey Products manufactures CYL-SEAL® pipe thread sealants. CYL-SEAL® compressed gas pipe thread sealant is the leak proof sealant for high pressure threaded pipe joints. CYL-SEAL® is a thick white liquid that seals compressed gas pipe or fittings threads to prevent leaks. Simply brush CYL-SEAL® onto pipe threads before assembly to help prevent leaks. CYL-SEAL® fills thread imperfections or gaps and then cures into a tough elastic solid.
THE NEED FOR PIPE THREAD SEALANTS
Microscopic imperfections or abrasions in pipe or fitting threads can provide a slow escape for expensive or dangerous compressed gases. These same imperfections, especially abrasions or burrs, often tear or wrinkle thread-sealing tapes such as Teflon® tape. Further, compressed gas leaks can result from vibration, chemical action, or corrosion. Slow leaks from small defects or vibration can be dangerous, expensive, frustrating, time consuming, or lead to a reputation for poor quality and service.
BENEFITS OF USING CYL-SEAL® PIPE THREAD SEALANT
- Excellent lubricant, prevents galling and seizing
- Resists acids, caustics, chlorine and brine
- Effective on flawed pipe thread
- Economical – one gallon makes approximately 2000 joints of 3/4 inch
- Keeps joints tight even under vibration
- Non-toxic, non-flammable
INSTRUCTIONS FOR USE OF CYL-SEAL® PIPE THREAD SEALANTS
This specially engineered thixotropic material is perfect for brush application with no dripping or running. Use as follows:
- Shake well before use
- Keep from freezing
- Clean threaded surfaces
- Brush CYL-SEAL® pipe thread sealant on the male threads of pipe or fitting
- Use just enough – no excess should run from threads during assembly
APPLICATIONS FOR CYL-SEAL® PIPE THREAD SEALANTS
CYL-SEAL® is popular for use in:
- Vacuum systems
- Valve threads
- Natural gas
- Compressed air lines
- Refrigeration systems
- Bottled welding gases
- CO2, methyl chloride, propane, air, SO2, CL2, H2S, ammonia, and butane
Contact Abbey Products about using CYL-SEAL® with compressed oxygen or oxygen tanks.
TECHNICAL PROPERTIES OF CYL-SEAL® PIPE THREAD SEALANTS
CYL-SEAL® is a thixotropic liquid emulsion that cures into a tough elastic solid that withstands severe vibration. Its excellent lubrication properties prevent galling and seizing. CYL-SEAL® resists acids, caustics, chlorine, and brine.
View the CYL-SEAL® product data sheet or Contact Abbey Products for technical information.
|1900121||1 gallon / 4 per case|
|1900111||1 pint (16 oz) /12 per case (Dauber Top)|
|1900103||Half pint (8 oz) /12 per case (Brush Top)|
CONTACT ABBEY PRODUCTS – YOUR PIPE THREAD SEALANTS MANUFACTURER AND SUPPLIER
Click Here to Contact Abbey Products / Abbey Companies or call toll free at 1-877-9ABBEY9 for further assistance with your compressed gas/high pressure pipe thread sealants needs.
Your Gas Leak Detection Fluid Manufacturer and Supplier